Turntables, Revolving Platforms, Sign Rotators for presentations and trade shows, mains and battery powered display motors, electric motors, gear motors for displays and industrial applications.
Important Remark:
Bending forces like wind power outdoor, public access, excentric installations, etc., can be multiple of the indicated load capacity of the motor drive (or turntable). Please contact us for a complimentary advice in finding a secure and reliable solution.
Turntable EDB with 3 Counter Revolving Platforms
SW 300 Turntable with 3 revolving plates rotating in counter direction (3-tier-turntable). The plates are made of 16mm MDF coated with Nextel anthracite or RAL-black matt varnished.
This rotating display stand is recommended to use in shop windows and for decoration purposes.
Data
- Max. centric load: 5 / 3 / 2 kg each platform from bottom to top
- Turn plate: Ø 600 / Ø 400 / Ø 200 mm
- Total height of turntable: 260 mm including lamp holder
- Power cord: 2 m
- Dead weight: ca. 8 kg
- Rotating speed: 2 rpm
- Rotation direction: opposite direction of rotation
- Operating voltage: 220-240 V AC
- Motor power consumption: <10 W
Special Features
- Safety clutch due to belt drive
- Platforms mounted on ball bearings
- Lighting with hollow shaft and lamp holder
Options
- Rotating speed: 0.8 rpm
- Operating voltage: 110-120 V AC
- Country specific plug
- Lamp holder for different lamps available
- Tube (non rotating) length on request
Data Sheet
Rotating Display
Turntable S 080
Mains powered plastic turntable, ball bearing, safety clutch. Turntable for shop window decoration purposes, as display turntable or driving unit for colums, cubes, models, products, etc.
Data
- Max. centric load: 5 kg
- Turn plate: Ø 150 mm
- Total height of turntable: 65 mm
- Power cord: 2 m
- Dead weight: ca. 0.5 kg
- Rotating speed: 2.0 rpm
- Rotation direction: clockwise (cw)
- Housing: plastic, white
- Operating voltage: 220-240 V AC
- Motor power consumption: <10 W
Special Features
- Safety clutch
Options
- Rotating speed: 4 rpm
- Rotation direction: counterclockwise (ccw)
- Operating voltage: 110-120 V AC
- Country specific plug
Data Sheet
Rotating Display Turntable
S 080 S (with hollow tube)
Mains powered turntable in white plastic with big ball bearing and safety clutch. Display turntable with low noise. Fixed hollow tube with cable for installation of different lamp holders and lamps. Turntable is especially applicable for rotating illuminated displays.
Data
- Max. centric load: 5 kg
- Turn plate Ø 150 mm
- Total height of turntable: 65 mm (without tube)
- Power cord: 2 m
- Dead weight: ca. 0.5 kg
- Rotating speed: 2 rpm
- Rotation direction: clockwise (cw)
- Housing: plastic, white
- Operating voltage: 220-240 V AC
- Motor power consumption: <10 W
- Lamp max. 60 W
Special Features
- Safety clutch
- Hollow shaft with tube
Options
- Rotation speed: 4 rpm
- Rotation direction: counterclockwise (ccw)
- Operating voltage: 110-120 V AC
- Country specific plug
- Lamp holders for different lamps
- Tube (non rotating) length on request
Data Sheet
Revolving Turntable
SWD 100, Exhibition Turntable
Turntable especially used as exhibition rotator is also available as hanging unit for 5 kg load. Rotating motor usable for lots of areas of application for example shop windows, exhibitions, decoration purposes, etc.
Data
- Max. centric load: 10 kg
- Turn plate: Ø 124 mm
- Total height of turntable: 75 mm
- Power cord: 2 m
- Dead weight: ca. 1 kg
- Rotating speed: 2.5 rpm
- Rotation direction: clockwise (cw)
- Housing: diecast metal zinc
- Operating voltage: 220-240 V AC
- Motor power consumption: <10 W
Special Features
- Safety clutch
- Double supported by ball bearings
- 5 kg hanging load ceiling mounted
- Wall mounting possible (load upon special advice)
Options
- Rotating speed: different on request
- Rotation direction: counterclockwise (ccw)
- Housing: diecast metal zinc, white coated
- Turn plate Ø 225 mm
- Operating voltage: 110-120 V AC
- Country specific plug
- Slip ring with power cable for 4 A / 900 W (at 230 V AC)
- Second power cord for separate power supply of slip ring
- Hanging operation with special shaft and shackle
Hanging Rotator
SWD 200 H
Universally applicable ceiling mounted hanging rotator with security function by using ball bearing supported shaft. Optional rotating power supply (slip ring) for revolving platform available. Ceiling motor also available with white coated housing. For safe and long term operation.
Data
- Max. hanging load: 20 kg
- Turn plate: hanging shaft with shackle
- Total height of turntable: 87 mm (without shackel)
- Power cord: 2 m
- Dead weight: ca. 1,1 kg
- Rotating speed: 2.5 rpm
- Rotation direction: counter clockwise (ccw)
- Housing: diecast metal zinc
- Operating voltage: 220-240 V AC
- Motor power consumption: <10 W
Special Features
- Safety clutch
- Double supported by ball bearings
Options
- Rotating speed: different on request
- Rotation direction: clockwise (cw)
- Operating voltage: 110-120 V AC
- Country specific plug
- Housing: diecast metal zinc, white coated
- Slip ring with power cable for 4 A / 900 W (at 230 V AC)
- Second power cord for separate power supply of slip ring
Revolving Turntable
SW 200 Exhibition Turntable
Rotating platform also available with hollow shaft, tube and lampholder (E14 or E27) for illumination and outcoming cables or slip ring. Universally applicable as exhibition turntable, display turntable or decoration turntable.
Data
- Max. centric load: 20 kg
- Turn plate: Ø 225 mm
- Total height of turntable: 101 mm (without optional tube)
- Power cord: 2 m
- Dead weight: 2.4 kg
- Rotating speed: 2.5 rpm
- Rotation direction: clockwise (cw)
- Housing: plastic, white, steel base
- Operating voltage: 220-240 V AC
- Motor power consumption: <10 W
Special Features
- Safety clutch
Options
- Rotation Speed: different on request
- Rotation direction: counterclockwise (ccw)
- Operating voltage: 110-120 V AC
- Country specific plug
- Hollow shaft with tube and lamp holder for different lamps
(max. 60 W) - Tube (non rotating) length on request
- Outcomming cable (without tube) approx. 200 mm
- Slip ring with power cable for 4 A / 900 W (at 230 V AC)
- Second power cord for separate power supply of slip ring
Multi Purpose
Turntable SW 300
The turntable SW 300 is equipped with a belt drive and therefore with a robust safety clutch. The shaft is supported by 3 ball bearings. It is bending resistant and allows high pressure. The strong motor of the SW 500 provides high torque. The silent movement allows applications in quiet environments for shop windows, lighting logos, for rotating mannequins and especially for show cases.
New
- With Belt Drive
Data
- Max. centric load: 30 kg
- Turn plate: Ø 225 mm
- Total height of turntable: 101 mm (without hollow tube)
- Power cord: 2 m
- Dead weight: 2,5 kg
- Rotating speed: 2.0 rpm
- Rotation direction: clockwise (cw)
- Housing: plastic, white, metal base
- Operating voltage: 220-240 V AC
- Motor power consumption: <10 W
Special Features
- Safety clutch by driving belt
- Shaft supported by multiple ball bearings
Options
- Rotation Speed: different on request
- Rotation direction: counterclockwise (ccw)
- Operating voltage: 110-120 V AC
- Country specific plug
- Slip ring with power cable for 4 A / 900 W (at 230 V AC)
- Second power cord for separate power supply of slip ring
- Switch for changing rotating direction
- Hollow shaft with tube and lamp holder for different lamps (max.60 W)
- Tube (non rotating) length on request
- Outcomming cable (without tube) approx. 200 mm
Display Turntable SW 500,
Exhibition Turntable
Display turntable also available with slip ring for illumination. Massive bottom plate with bore holes. Shaft with 3 ball bearings for high bending power. Universally applicable as exhibition turntable, and hanging turntable for illuminated cubes and rotating signs.
Data
- Max. centric load: 50 kg
- Turn plate: Ø 225 mm
- Total height of turntable: 100 mm
- Power cord: 2 m
- Dead weight: ca. 4 kg
- Rotating speed: 2.5 rpm
- Rotation direction: clockwise (cw)
- Housing: plastic, white, steel base 3 mm
- Operating voltage: 220-240 V AC
- Motor power consumption: <10 W
Special Features
- Safety clutch
- Multiple shaft supported by ball bearings
- 25 kg hanging load ceiling mounted
- Wall mounting possible (load upon special advice)
Options
- Rotation Speed: different on request
- Rotation direction: counterclockwise (ccw)
- Operating voltage: 110-120 V AC
- Country specific plug
- Slip ring with power cable for 4 A / 900 W (at 230 V AC)
- Second power cord for separate power supply of slip ring
- Switch for changing rotation direction
- Special functions like reversing operation, cycle operation, stop times on request
Turntable for Exhibitions
SW 1000/2000/3000
The SW 1000 / 2000 / 3000 turntables are equipped with a robust asynchronous geared motor, the speed of which can be regulated by means of a frequency converter. The triple ball-bearing rotary axis ensures that higher bending forces can be absorbed. Ideal for use as shop window revolving stage, revolving stage for illuminated advertising, revolving stage for illuminated and moving logos, mannequin revolving stage, etc.
Data
- Max. centric load: 100 / 200 / 300 kg
- Turn plate: Ø 400 mm
- Total height of turntable: 110 mm
- Power cord: 2 m
- Dead weight: ca. 17 kg
- Rotating speed: 2.5 rpm
- Rotation direction: clockwise (cw)
- Housing: plastic, white, steel base 4 mm
- Operating voltage: 220-240 V AC
- Motor power consumption: <30 W
Special Features
- Safety clutch
- Multiple supported shaft by ball bearings
- 50 kg hanging load ceiling mounted
- Wall mounting possible (load upon special advice)
- Speed regulation by Frequency Inverter from – 40 to + 40 % (not Super Silent version)
Options
- Rotation Speed: 1 rpm
- Rotation direction: counterclockwise (ccw)
- Operating voltage: 110-120 V AC
- Country specific plug
- Slip ring with power cable for 4 A / 900 W (at 230 V AC)
- Second power cord for separate power supply of slip ring
Options Super Silent Version
- Very low noise motor
- Rotating speed: 1.4 rpm
- Rotation direction: counterclockwise (ccw)
- Switch for changing rotation direction
- Special functions like reversing operation, cycle operation, stop times on request
More Product Images
Mannequin Turntable for Synchronous Operation (Special Turntable
SW 1000)
Robust and long-lasting display turntable for mannequins.
Synchronous operation with new developed control unit and software.
Simultaneous operation of up to 150 turntables. They can be placed several hundred meters far from each other.
Simple installation and cabling even over different floors.
Compact control unit, easy to install and easy to operate.
Data
- Max. centric load: 100 kg
- Turn plate: Ø 400 mm
- Total height of turntable: 200-400 mm
- Adjustable feet
- Dead weigth: approx. 20 kg
- Rotating speed: 2,3 rpm
- Rotating direction: clockwise (cw)
- Housing: plastic, white, steel base 4 mm
- Operating voltage: 24 V DC with mains adaptor (Input voltage 90 – 264 V AC)
- Motor power consumption: <10 W
Special Features
- Safety clutch
- Multiple supported shaft by ball bearings
- Easy removable turn plate and shaft
- Very low noise Operation
Options
- Other rotation speed on request
- Turn plate with Ø 500 mm
- Stainless steel cover for turn plate with Ø 500 mm
- Extension shaft for total height of turntable up to 400 mm
- Rotation direction: counterclockwise (ccw)
- Country specific plugs
Turntable for Exhibitions
U 5000 and U 7500
For indoor and outdoor use. Exhibition turntable available with slip ring for illumination (4 A / 900 W or 8 A / 1800 W each at 230 V AC).
Special Features
- Torsion free
- Suited for indoor or outdoor operation
- Maintenance-free
- Standard version also applicable for 150 kg hanging load. With safety kit up to 500 kg.
- U 7500 with stronger ball bearings
Data
- Max. centric load: 500 kg / 750 kg
- Turn plate: Ø 400 mm
- Total height of turntable: 125 mm
- Power cord: 2 m
- Dead weight: ca. 22 kg
- Rotating speed: 1 rpm
- Rotation direction: clockwise (cw)
- Housing: metal zinc coated, steel base 6 mm
- Operating voltage: 220-240 V AC
- Motor power consumption: <20 W
Special Features
- Safety clutch
- Multiple supported by ball bearings
- 500 kg hanging load ceiling mounted
- Wall mounting possible (load upon special advice)
- Hollow shaft with Ø 42 mm
- Motor with very low noise
Options
- Outdoor operations
- Rotation direction: counterclockwise (ccw)
- Operating voltage: 110-120 V AC
- Country specific plug
- Slip ring with power cable for 4 A / 900 W or 8 A / 1800 W (at 230 V AC)
- Second power cord for separate power supply of slip ring
- Switch for changing rotation direction
- Special functions like reversing operation, cycle operation, stop times on request
- Upgrade by safety kit for up to 500 kg hanging load ceiling mounted
Available as rental turntable.
More Product Images
U 5000 and U 7500 Safety Kit for Ceiling Mounted Operation, Exhibition Turntable
Ceiling mounted turntable with safety equipment. Applicable for indoor and outdoor especially as exhibition turntable. Revolving plate also available as a collector ring version for illumination. Approved for trade show installations.
Special Features
- Torsion free
- Very silent
- Suited for both indoor and outdoor operation
- Maintenance-free
Data
Exhibition turntable especially approved!
- Max. centric hanging load: up to 500 kg
- Turn plate Ø 400 mm
- Total height of turntable with safety kit 1: 140 mm
- Total height of turntable with safety kit 2: 175 mm
- Power cord: 2 m
- Dead weight: ca. 30 / 46 kg
- Rotating speed: 1 rpm
- Rotation direction: clockwise (cw)
- Housing: metal zinc coated, steel base 6 mm
- Operating voltage: 220-240 V AC
- Motor power consumption: <20 W
Special Features
- Safety clutch
- Multiple supported by ball bearings
- Motor with extremely low noise
Options
- Outdoor operations
- Rotation direction: counterclockwise (ccw)
- Operating voltage: 110-120 V AC
- Country specific plug
- Slip ring with power cable for 4 A / 900 W or 8 A / 1800 W (at 230 V AC)
- Second power cord for separate power supply of slip ring
- Switch for changing rotation direction
- Special functions like reversing operation, cycle operation, stop times on request
Available as rental turntable (including safety kit).
Video
Build In Turntable for Exhibitions
K5000 and K7500
Built-in turntable in compact design for narrow installation spaces. Also available with slip ring as rotating power supply (power transmission 4 A / 900 W standard or 8 A / 1800 W special version).
Special Features
- Torsion free
- Very silent
- Maintenance-free
- K 7500 with stronger ball bearings, especially applicable for trade shows, indoor advertising signs and logos.
Data
- Max. centric load: 500 kg / 750 kg
- Turn plate: Ø 220 mm
- Total height of turntable: 132 mm
- Base: DIN A4 format
- Power cord: 2 m
- Dead weight: ca. 16 kg
- Rotating speed: 1 rpm
- Rotation direction: clockwise (cw)
- Housing: none, steel base 10 mm
- Operating voltage: 220-240 V AC
- Motor power consumption: <20 W
Special Features
- Safety clutch
- Multiple supported by ball bearings
- 500 kg hanging load ceiling mounted
- 150 kg wall mounted
- Hollow shaft with Ø 42 mm
- Motor with very low noise
Options
- Rotation direction: counterclockwise (ccw)
- Operating voltage: 110-120 V AC
- Country specific plug
- Slip ring with power cable for 4 A / 900 W or 8 A / 1800 W (at 230 V AC)
- Second power cord for separate power supply of slip ring
- Switch for changing rotation direction
- Special functions like reversing operation, cycle operation, stop times on request
Data Sheet
Frequency Converter (FC) as Speed Sontroller for Turntables
Speed controller for turntables can be easily installed by means of plug-in connections already provided. Infinitely variable speed control +/- 40 %.
Suitable for all turntables with asynchronous geared motors such as
Turntables SW 1000 to SW 3000
Heavy duty revolving platform STO 1
Attention: When using with slip ring, a second supply line must be provided for the slip ring.
Data using an example
Frequency Converter FC for turntables
- Digital display with integrated control panel
- Speed regulation from – 40 to + 40 % of the standard speed
- Dimensions: h 142, w 72, d 101 mm
- Dead weight: 0.7 kg / 1.55 lbs
- Power Cord: 2 meter with protective earth conductor
- Connection cable to tunrtable: ca. 20 cm
- Operating Voltage: 220-240 V AC
- Overheating and overvoltage protection
Options
- Country specific plug
- Operating Voltage: 110-120 V AC V
Basically, a commercially available FC is used for the application. The above information may change at any time depending on availability.
